Home & Decorative
Picture Light Placement Calculator
Find the ideal position and angle for picture lights, track fixtures, or recessed accents to illuminate artwork without glare or hot spots. Adjust the inputs and watch the beam diagram update.
Artwork Dimensions
Artwork Width  36 in
Artwork Height  24 in
Top of Artwork from Floor  72 in
Fixture Settings
Fixture Type
Ceiling Height  108 in
Target Beam Angle  30°
Aiming Angle (from vertical)  30°
Side View — Cross Section
—
in from wall
Fixture offset
—
in AFF
Fixture height
—
in coverage
Beam on artwork
Placement Summary
Fixture height above floor—
Horizontal offset from wall—
Aiming point on artwork—
Beam footprint on artwork—
Artwork coverage—
Pro tip: For track lights, the standard recommendation is to mount the fixture ≈ 1/3 of the artwork height above the top edge and offset from the wall by 30–60% of the ceiling-to-artwork-top distance. Aim at the center of the artwork using a 30° tilt from vertical for minimal glare.
Scroll to Top

The calculators and tools on LightingCalc.lighting are provided for general guidance and informational purposes only. Results are estimates based on standard formulas and the values you enter — they do not constitute professional engineering, electrical, or architectural advice. Always verify calculations with a qualified professional before making decisions for any safety-critical, code-compliance, or commercial application. LightingCalc.lighting makes no representations or warranties as to the accuracy or completeness of any result, and accepts no liability for errors, omissions, or any outcomes arising from reliance on this information.